EasyManua.ls Logo

SGC MAC-200 - Auto vs. Manual Operation Modes

SGC MAC-200
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PO Box 3526, Bellevue, WA. 98009 13737 SE 26
th
St. Bellevue, WA. 98005
Toll Free: 800-259-7331 * Phone: 425-746-6310 * Fax: 425-746-6384
www.sgcworld.com * Email: sgc@sgcworld.com
© 2003 SGC Inc. 32
Switch Number Antenna
1 Balanced Antenna
2 Long Wire Antenna
3 Coax 3
4 Coax 4
5 Coax 5
4.4 Auto vs. Manual Antenna Selection
The AUTO and MANUAL buttons control the operation of the
microprocessor in selecting an antenna. A small LED over each
switch indicates the current operating mode.
In AUTO mode operation the MAC-200 remembers not only the
frequency, but the antenna. The tuner will save the selected
antenna along with the tuner settings when a successful match is
found. Both the tuner settings and the antenna settings will be
recalled the next time the MAC-200 is operated at that frequency.

Table of Contents