PO Box 3526, Bellevue, WA. 98009 13737 SE 26
th
St. Bellevue, WA. 98005
Toll Free: 800-259-7331 * Phone: 425-746-6310 * Fax: 425-746-6384
www.sgcworld.com * Email: sgc@sgcworld.com
© 2003 SGC Inc. 48
(ALE). The default is: Tuning Out In Rcv: [NO].
Jumper JP3 bypasses the coupler’s memories. This means that each
time the coupler is used on a different frequency, it will retune
rather than use previously stored information. The default is: Tune
From Memory: [YES].
5.1.8 Program Description
When DC power is applied, the computer initializes the processor
registers in accordance with the hardware. All tuning elements are
then removed and the ‘tune’ indicators are turned off. At this time
the computer reverts to a “sleep” mode awaiting RF power.
To Next Page
Loading...