11
Preparing for installation
Unpack the device and inspect it to ensure that it has not been damaged during transport.
The P-2 is shipped with an Omega bracket, that can be used to mount the device at elevation. The device is IP65-rated, and
is designed for use in wet locations. This means that it is protected from:
• Dust, to the degree that dust cannot enter the device in sufficient quantities as to interfere with its operation.
• Lower pressure jets of water from any direction.
When selecting a location for the device, ensure that:
• It is situated away from public thoroughfares and protected from contact with people.
• It is not immersed in water or exposed to high-pressure water jets.
• It has adequate ventilation.
P2 Manual_170x113,3.book Page 11 Wednesday, January 7, 2015 11:47 AM
To Next Page
Loading...
