16
Connecting to a DMX control device
The device is controllable using a DMX control device and it can be connected using a DMX cable.
If using a cabled DMX system, connect the DMX in cable (with male 5-pin XLR plug) and out cable (with female 5-pin XLR
plug) to the DMX data link. Terminate the DMX out cable of the last device in the data link. For outdoor installations, use only
IP-rated XLR connectors suitable for outdoor use.
P2 Manual_170x113,3.book Page 16 Wednesday, January 7, 2015 11:47 AM
To Next Page
Loading...
