13sharkclean.com.nz
MAINTAINING YOUR VACUUM
CLEANING THE FILTERS
Regularly rinse and reinstall the filters to maintain your vacuum’s suction power.
To clean filters, rinse them with water only. Allow all filters to air-dry completely before reinstalling to
prevent liquid from being drawn into electricparts.
Clean the pre-motor filters at least once a month and post-motor filter at least once a year. Tap o loose dirt
between washes when needed. More frequent cleaning may sometimes be necessary with heavy use.
IMPORTANT: DO NOT use soap when cleaning the filters. Use water only. The vacuum will not have suction if the post-motor
filter is not installed. Ensure that all filters are installed before using.
PRE-MOTOR FILTER POST-MOTOR FILTER
Press the dust cup release button and remove the
dust cup. Pull the foam and felt filters out of the
back of the dust cup.
Remove the dust cup. Pull the post-motor filter out
of the handheld vacuum.
Pre-Motor Foam and Felt Filter Kit Post-Motor Filter
To Next Page
Loading...
Need help?
General
