8 sharkclean.com.au
CHARGING THE BATTERY
To charge simply plug the charger into the charging
port while still attached to the wand.
To put the vacuum in storage mode, press the
MultiFLEX® Wand Unlock Latch while folding the
handheld vacuum forward until the wand clicks and
locks. Plug the charger into the charging port on the
handheld vacuum.
The battery is removable, press and hold the
Battery Release Button, then slide out the battery.
Plug the charger into the charging port on the
battery. To reinstall the battery, slide it into the slot
in the back of the handheld vacuum.
USING THE LI-ION CHARGER
IN HANDHELD VACUUM
IN THE VACUUM: MULTIFLEX® OUT OF THE VACUUM
Plug the Li-Ion Charger into a wall outlet.
LI-ION CHARGER
To Next Page
Loading...
