16
RUNNING A SESSION
Step 1 / Put on the mask
Begin with a clean, bare and dry face.
Step 2 / Adjust the back and top straps - full instructions on page 11.
Adjust the straps to position mask comfortably on your face. Slide buckles simultaneously
to adjust the back strap. To adjust the positioning of the back strap on your head, release
the top self-fastening strap and gently pull the back strap so that it sits parallel to the floor.
Step 3 / Power on
Turn on the mask by pressing and holding the remote’s dial button. On first use, a short demo video
on the remote screen, will show you how to fit the mask and interact with the remote.
Step 4 / Select and run a routine
Use the remote to choose a routine and begin by selecting “Start.” Under-eye cooling will
automatically turn on. Adjust the under-eye chill pads’ intensity to your desired level with the remote’s
chill button.
Step 5 / Remove and clean the mask
When your session is complete, remove the mask. Fans will run for 60 seconds to power down the chill
pads, then the mask will shut o automatically. Once you have taken o the mask, clean the mask with
a damp cloth. Continue with your daily skincare routine.
Note: Please read the Warnings, Instructions, and Contraindications before first use.
Make sure the mask has been fully charged before first use (this could take up to 3 hours).
How to fit Shark CryoGlow into your routine
Take the time with your first few uses to experiment with how Shark CryoGlow can best fit into your
existing routine. Give it a try in the morning to help you feel fresh for the day. If this doesn’t work,
try it in the evening to help you wind down and relax when you have more time.
Chill pads should be positioned under the eyes,
making light contact with your skin. You may
need to attach the optional clip-on chill pads
available in the box to achieve best fit.
The top strap should be
positioned in the centre of
your head whilst the back strap
should be parallel to the floor.
To Next Page
Loading...
