16
4
3
• Remove the dust cup and extension wand
and separate the detachable canister from the
motorized floor brush. Look in all 4 openings
for any blockages. (Fig. 27)
5 Motorized Floor Brush
• Detach the hose on the motorized floor brush
at the top by squeezing the tabs together and
pulling out, and at the bottom by pulling out
the connector. Inspect inside the 3 holes.
(Fig. 28)
Fig. 28
Maintenance - cont’d
Ordering Parts
Fig. 27
1
2
PART PART NO.
1 Pre-Motor Filter Set XFF350
2 HEPA Filter XHF350
3 Dusting Brush 112FFJ
& Crevice Tool
4 Turbo Brush 1117FC
5 24” Crevice Tool 1124-FC
To order additional parts or accessories go to
www.sharkclean.com or call 1-800-798-7398.
5
To Next Page
Loading...
Need help?
General
