Shark NV355 Series User Manual

Above-Floor Cleaning
Fig, 17
Suction
Release Collar
{__ Re_easesuctbnwhen
"_" duiiing d@i_te
objects [u/nitue o/
all@arieS,
CLEANABOVE THE FLOORIN UPRIGHTVAC OR
PORTABLELIFT-AWAY ®MODE
1 Pressthe handlereleasebutton and pull the
handleup or pressthe extensionwand release
button and pullthe extensionwand up.
2 Attach desiredaccessoryonto the end of either
the extensionwand or the handle.(Fig. 17)
3 Your vacuum has tremendous suction
power. Adjust the amount of suction with
the suction release on the handle. Open
the valve (a) by rotating the collar 90 °
counterclockwise for low suction when
doing light jobs such as drapes or fine
surfaces. Close the valve (a) by rotating the
collar clockwise 90 ° for high suction and
when using the hand held power brush.
(Fig. 17-a)
4 Pressthe On/Off switch to the "1" positionto turn
the vacuumonfor above-floorcleaning.
_IMPORTANT: Ensurevacuumis in upright
position. Donot useposition "11"whencleaning
abovethe floor in the uprightvac modeasthis
will engagethe motorized floor brush,The
rotating brushmaydamageyour floor if runfor a
prolongedperiod of time in one area.
NV355 NV356E NV356K NV357 NV355CS NV356KCS IB Eq_u811 4.Jndd 11 11-08-11 12:46PM

Shark NV355 Series Specifications

General

Type	Upright
Bagless	Yes
Filtration	HEPA
Cord Length	25 feet
Warranty	5 years
Weight	13.7 pounds
Features	Anti-Allergen Complete Seal Technology
Attachments	Crevice Tool, Dusting Brush