18www.sharkninjamanuals.com
Using Your Removable Handheld Steamer
with Cylinder Cleaning Tool
5 To remove the Cylinder Cleaning Tool, press and
hold down the Accessory release button. Then slide
out the Cylinder Cleaning Tool.
CAUTION: Do not press steam trigger while
attaching or removing the Cylinder Cleaning Tool.
Always use the Cylinder Cleaning Tool with Bonnet
attached.
Cleaning Tip: The Cylinder Cleaning Tool provides controlled cleaning and reaches into narrow areas and around
curved and contoured surfaces for steam dusting and fine cleaning activities. It is a great cleaning tool for in and
around sinks, bathtubs, refrigerator doors, window sills, door jams and frames, exhaust and intake vents, banisters,
railings, spindles, furniture, seating and more.
1 Slide the Cylinder Cleaning Pocket over the Cylinder
Cleaning Tool frame until it is completely on. (fig. 29)
2 Close the cinch by pulling on the elastic band and
sliding the locking bean to tighten. (fig. 30)
3 Attach the Cylinder Cleaning Tool by snapping into
the handle of the Accessory Hose. (fig. 31)
4 Select either DUST, MOP or SCRUB mode by
pressing the ON/STEAM SETTING button and wait
until the selected setting indicator light turns solid
blue. Hold down the steam trigger to start steaming.
(fig. 32)
fig. 29
fig. 31
fig. 32
fig. 30
To Next Page
Loading...
Need help?
General
