Note: For Maintenance
Considering the potential battery-life loss caused by regular high-power fast charging,
we recommend doing a battery maintenance every 3 months, which can protect the
battery from the battery-life loss. When ‘storage’ appears on the screen, the charger
will provide maintenance to the battery.
In the event that the battery has not been used for a long time (such as 1 month), it is
recommended to perform a maintenance first before charging.
It takes approx. 2 hours to fully charge the drone battery. When the battery is fully
charged:
Unplug the power cord from the power supply
Disconnect the charging cables with the SharkX battery and the charger
Disconnect the power cord with the battery charger
5.3. Charge the Controller
Notice always charge the controller when the temperature is between 10°C and 45°C.
To Next Page
Loading...