SharkRack Enclosure Installation Guide
ID-00210-000 REV D, ECO2773 Page 18 of 46
How to Reverse the Door Swing
Step Detail
Reverse the door handle:
1. Open the door.
2. Rotate the handle to align the cam pointing
down.
3. Use a screwdriver to push the snaps inward. Lift
the handle off the door.
4. Remove the cam screw securing the cam and
rotate the cam 180°. Re-secure with the cam
screw.
5. Rotate the door handle assembly 180° and
reinstall it.
Figure 15
Snap-In Handle and Lock
CAM
To Next Page
Loading...