Sharp AH-XP10YH Series - Plasmacluster Operation; Baby Mode Operation

EN-10
NOTE:
•UseofthePLASMACLUSTERop-
erationwillbememorized,anditwill
beactivatedthenexttimeyouturn
on the unit.
•ToperformPLASMACLUSTERop-
eration in FAN only mode, press the
PLASMACLUSTERbuttonwhenthe
unit is not operating.
The mode symbol of the remote
controlwillgooffandthefanspeed
cannot be set to AUTO.
Plasmacluster ions released into
the room will reduce some airborne
mold.
1
During operation, press the PLAS-
MACLUSTER button.
• Theremotecontrolwilldisplay " " .
• The OPERATION lamp ( )will
turn from green to blue.
TO CANCEL
Press the PLASMACLUSTER but-
ton again.
• The OPERATION lamp ( )will
turn from blue to green.
1
PLASMACLUSTER
OPERATION
Soft , quiet and clean operation
provides optimized cooling for in-
fants.
1
During operation, press the
BABY MODE button.
•Theremotecontrolwilldisplay" ".
•Fanspeedwillbeautomatically
set to LOW, SOFT or QUIET.
•Louverwillbesettotopposition
(Coandaposition).
•PLASMACLUSTERwillbeturnedon.
TO CANCEL
Press the BABY MODE button
again.
NOTE:
•BABYMODEoperationisnot
available in DRY and FAN mode.
1
BABY MODE OPERATION
OM B088 EN+TH+VN+CS.indb 10 2022/6/21 13:16:22