Sharp AH-XP10YH Series - Maintenance

EN-14
Be sure to disconnect the power cord
from the wall outlet or turn off the
circuit breaker before performing any
maintenance.
CLEANING THE AIR FILTER
1
Turn off the unit.
2
Remove the air lter.
Insertngerintohandlestoliftthe
airlter up.
3
Clean the air lter.
Use a vacuum cleaner to remove
dust.Iftheairlterisdirty,washit
withwarmwaterandamildde-
tergent.Dryairlterintheshade
before reinstalling.
4
Reinstall the air lter.
Holdtheairlterandinsertthe
hooks into the holes until match
each other.
MAINTENANCE
Handles
Airlter
CLEANING THE UNIT AND THE RE-
MOTE CONTROL
•Wipethemwithasoftcloth.
•Donotdirectlysplashorpourwa-
ter on them. It can cause electrical
shock or equipment damage.
•Donotusehotwater,thinner,abra-
sivepowdersorstrongsolvents.
MAINTENANCE AFTER AIR CONDI-
TIONER SEASON
1
Dry the inside of the indoor unit
thoroughly.
Run the unit in the SELF CLEAN
operation mode.
2
Stop the operation and unplug
the unit.
Turn off the circuit breaker, if you
haveoneexclusivelyfortheair
conditioner.
3
Clean the air lter, then reinstall
it.
MAINTENANCE BEFORE AIR CON-
DITIONER SEASON
1
Make sure that the air lter is
not dirty.
2
Make sure that nothing ob-
structs the air inlet or outlet.
Presstheairlterdownuntilit
clicks.
Hook
Hole
OM B088 EN+TH+VN+CS.indb 14 2022/6/21 13:16:26