EN-6
ON/OFF
button
Below are some simple ways to save
energy when you use your air conditioner.
Set the proper temperature
•Settingthetemperaturelowerthan
necessaryduringcoolingoperationwill
resultinincreasedpowerconsumption.
Block direct sunlight and prevent drafts
•
Blocking direct sunlight during cooling
operation
willreducepowerconsumption.
•Closethewindowsanddoorsduring
cooling operations.
Keep lter clean to ensure the most
efcient operation
Disconnect the power cord when the
unit is not used for an extended period
time
•Theindoorunitstillconsumesasmall
amountofpowerwhenitisnotoperating.
TIPS ON SAVING ENERGY
Usethismodewhentheremotecon-
trol is not available.
TO TURN ON
Press the ON/OFF button.
•TheOPERATIONlamp( )willlight
upandtheunitwillstartoperatingin
the AUTO mode.
•Thefanspeedandtemperatureset-
ting are set to AUTO.
TO TURN OFF
Press the ON/OFF button again.
•TheOPERATIONlamp( )willturn
off.
Mode Indoor Temp. Outdoor Temp.
Cooling Above 21°C
Above 21°C
and
below43°C
•Thebuild-insafetydevicemay
prevent
the unit from operating even
if
not reach the setting temperature
whenusedoutof
this range.
•Condensationmayformontheairout-
let
if the unit operates continuously
intheCOOLorDRYmodewhen
humidity is over 80%.
Pairingthemobiledevicewiththe
airconditionerbywirelessLAN,
you can operate the air conditioner
and monitor the condition of the air
conditioner by the mobile device.
Pleaserefertothe"wirelessLAN
guidebook" to get more information
aboutthewirelessLANpairing.
AUXILIARY MODE
OPERATION CONDITION
OPERATION CONDITION
SMART NETWORK FUNCTION
(Forpremiummodelsonly)
The green
WLAN
lampwill
lightupwhenthe
wireless
LAN
pairing succeed.
OM B088 EN+TH+VN+CS.indb 6 2022/6/21 13:16:18