INDEX
CONTENTS
2
2
The flow chart shown below provides printing overview.
Reference: For more information on printing, see Basic Printing.
* The multi-bypass tray can be used on the AL-1551CS, and the single bypass can be used on
the AL-1530CS/1540CS. For the procedures for loading paper in each type of tray, see
"LOADING PAPER" in the Operation Manual.
Caution
! When the paper source is the paper tray or multi-bypass tray, verify that the paper has been loaded before starting
printing.
! Ensure printing has been completed before turning the power off. Do not remove the power cord before turning
the unit off.
When printing from paper tray or multi-bypass tray
* When printing from single bypass*
Prepare the document you intend to print
Send print data from your computer
Printing
Exit printing
Load a single sheet of paper into the single bypass
Reference:
For more detail, refer to the "BYPASS FEED (including special paper)" in
the Operation Manual.
Open the printer driver setup screen and set the print preferences
Reference:
Printer Driver Settings, Printing a Watermark, Fitting the Printed Image to the Paper,
Printing Multiple Pages on One Page, Two-sided Printing (AL-1551CS only)
Printing Overview
To Next Page
Loading...
