9
75
Images rub off
the copy easily.
Is the paper too heavy? Use paper within the specified
range.
9
The fusing temperature is
not appropriate.
In the user programs, set "Fusing
temperature setting when the
bypass tray is used" (program 29)
to "2 (High)".
67
Paper damp? Replace with dry paper. If the unit
is not used for long time, remove
the paper from the paper tray and
store it in its wrapper in a dry
location.
–
Printing is not
uniform
between the
edges of the
paper and the
centre.
The fusing temperature is
not appropriate.
In the user programs, set "Fusing
temperature setting when the
bypass tray is used" (program 29)
to "1 (Low)".
67
Problem Possible cause Solution Page
To Next Page
Loading...
Need help?
General
