SCANNER FUNCTIONS
110
Basic settings for network scanning
Click [Network Scanning] in the menu frame and configure the required settings. A
password is required to access this screen. (p.113) These settings should only be
configured by the network administrator. For explanations of each of the items, click
[Help] in the menu frame.
1
Click [Network Scanning] in the
menu frame.
The Network Scanning setup page
appears.
2
Select the transmission methods that you wish to use.
Select the scanner delivery methods that you want to use. In the "Enable
Scanner Delivery to:" field, click the checkbox next to each method that you
want to use so that a checkmark appears in the checkbox.
All transmission methods are initially selected (factory default settings).
3
Configure the Advanced Setup settings.
Select advanced functions that can be used for Scan to E-mail.
If you wish to BCC a copy of a Scan to E-mail transmission to an e-mail
address, select the [Bcc] checkbox and enter the e-mail address.
To Next Page
Loading...
