Sharp AL-2051 - SELECTING A SETTING FOR A USER PROGRAM

USER SETTINGS
134
20 LANGUAGE
1: AMERICAN
ENGLISH
2: ENGLISH
3: FRENCH
4: SPANISH
5: ------
:
:
18: Brazilian
portuguese
This is used to set the language
used in the display.
18 Languages can be selected.
21 RESET FACTORY
1: Yes
2: No
This is used to return all settings
to the factory default settings.
22
SORT AUTO
SELECT
1: ON
2: OFF
Use this setting to enable or
disable sort auto select mode.
24
CHECK RSPF
OPEN
1: ON
2: OFF
• You can set the operation that
takes place if the [START] key
( ) is pressed when the
RSPF is not completely closed.
(For details on the "Check RSPF
open function", see page 15.)
25
VALID COPY
WIDTH
1: A4
2: B5
• Set the allowed paper sizes for
copying from the bypass tray.
When "B5" is selected, a copy
of a letter size original will only
be printed up to invoice size.
28 LSU SETTING
1: ON
2: OFF
• Select whether copying is only
allowed when the polygon
motor is rotating, or also when
the polygon motor is stopped.
29 PAPER TYPE
1: PLAIN PAPER
2: HEAVY
PAPER
• Set the temperature of the
fusing unit when the bypass
tray is used.
30
DISPLAY
CONTRAST
1: LIGHTER
2: LIGHT
3: NORMAL
4: DARK
5: DARKER
• Set the contrast of the display.
31 DATE & TIME SET
• Set the date and time to be
used for fax or other purpose.
32
DATE & TIME
FORMAT
1: TIME FORMAT
1: 12 HOUR
2: 24 HOUR
• Select the time format of 12
hours or 24 hour pattern.
2: DATE FORMAT
1: MMDDYYYY
2: DDMMYYYY
3: YYYYMMDD
• Select the date format among
the 3 patterns.
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation