Sharp AN-PR1500H - Connecting to a Conventional Tv;Monitor; The Unit

15
AN-PR1500H_EN.fm06/3/14
AN-PR1500H
TINSEA127AWZZ
1
Preparation for Use
Connecting to a conventional TV/monitor
 If the TV/monitor has video input, connect
it to the VIDEO OUT socket on the rear of
the unit.
 If the TV/monitor has S-video input,
connect it to the S-VIDEO OUT socket on
the rear of the unit.
 If the TV/monitor has component video
input, connect it to the COMPONENT
VIDEO OUT socket on the rear of the unit.
Notes:
 Change the TV input in accordance with the connected socket.
 Do not connect other equipment between the TV and this unit. If they are connected
via a VCR, pictures may be distorted.
 If your TV has different indications for the component video inputs (Y, CB and CR
or Y, B-Y and P-Y), connect sockets with its matching colour.
 Do not connect to a component video input socket designed for the high-vision
system, which is not DVD-compatible (the images may be distorted or not appear).
 If the TV/monitor has scart input, connect it
to the SCART OUT socket on the rear of the
unit. (Do not connect the SCART cable to
equipment other than the TV/monitor)
To select SCART function:
 On main unit: Press FUNCTION button repeatedly until SCART is displayed.
 On remote control: Press VIDEO MODE or AUX button repeatedly until SCART is
displayed.
 If the TV/monitor has HDMI input, connect it
to the HDMI socket on the rear of the unit.
Caution:
Turn off all other equipment before making connections.
Video signal
TV
(not supplied)
To video
input socket
TV
Video signal
S-video cable
(not supplied)
To S-video
input socket
TV
Component
video cable
(not supplied)
To component
video input socket
TV
To SCART
input socket
SCART cable
(not supplied)
Video/Audio signal
HDMl cable
To HDMI
input socket
TV