57
AN-PR1500H_EN.fm06/3/14
AN-PR1500H
TINSEA127AWZZ
1
Advanced Features
Timer and sleep operation (Remote Control only)
Timer playback:
The unit turns on and plays the desired source (DVD/CD, USB, TUNER, DIGITAL 1,
DIGITAL 2, DIGITAL 3, LINE 1, LINE 2, LINE 3, SCART) at a preset time.
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio programme, and use the daily
timer to wake up.
Note:
When the setting times for daily timer and once timer overlap, the once timer takes
priority. Allow an interval of at least 1 minute between operations.
Timer playback
Before setting timer:
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer:
Once timer play works for one time only at a preset time.
Daily timer:
Daily timer play works at the same preset time every day.
For example, set the timer as a wake-up call every morning.
1 Set the daily timer (pages 57 - 58).
2 Set the once timer (pages 57 - 58).
Start
Daily timer
Once timer
1 minute or more
Stop
Start
Stop
1 2 3
4 5 6
7 8 9
+100
1 Check that the clock is set to the correct time (refer to page 28).
If it is not set, you cannot use the timer function.
2 For timer playback: Load discs to be played.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the or button to select “ONCE” or
“DAILY”, and press the MEMORY/DIMMER button.
Set the clock to the correct time if “ONCE” or “DAILY” does not appear.
4 Within 10 seconds, press the or button to select “ONCE
SET” or “DAILY SET”, and press the MEMORY/DIMMER button.
5 Press the or button to adjust the hour and then press the
MEMORY/DIMMER button.
The illustrations show the timer playback setting in the daily timer mode.
6 Press the or button to adjust the minutes and then press the
MEMORY/DIMMER button.
Continued to the next page
To Next Page
Loading...
