Sharp AN-PR1500H - Specifications

AN-PR1500H_EN.fm06/3/14
TINSEA127AWZZ
64
AN-PR1500H_EN.fm06/3/14
AN-PR1500H
TINSEA127AWZZ
References
Specifications (continued)
 USB
 Front speaker
 Tuner
 Subwoofer
 DVD player
 Remote control
USB host interface
 Complies with USB 1.1/2.0 (Full Speed)
Mass Storage Class.
 Support Bulk only and CBI protocol.
Support file
 MPEG 1 Layer 3
 MPEG 2 Layer 3
 WMA (Non DRM)
 JPEG
Bitrate support
 MP3 (32 - 320 kbps)
 WMA (64 - 160 kbps)
Other
 Maximum total number of MP3/WMA files is 1200.
 The ID3TAG information supported are TITLE,
ARTIST and ALBUM only.
 Support ID3TAG version 1 and version 2.
File system support
 Support USB devices with Microsoft Windows/DOS/
FAT 12/FAT 16/FAT 32.
 2 kbyte block length for sector.
USB output terminal
 Output voltage: 5V
 Maximum current: 500 mA
Type
2-way type speaker system (Magnetically shield)
5 cm (2") Tweeter x 2
10 cm (4") Woofer x 2
Impedance
4 ohms
Frequency range
FM 87.5 - 108 MHz
Others
Maximum stations can be stored is 30 preset.
Type
Bass reflex system
16 cm (6 - 1/2") Woofer x 2
Maximum input power
150 W
Impedance
4 ohms
Signal system
PAL/NTSC colour
Supported disc types
DVD (with the same region number at the back of the
unit), audio CD, MP3, WMA, CD-R, CD-RW, JPEG,
DivX (version 3 ~ 6)
Video signal
Horizontal resolution: 500 lines
S/N ratio: 70 dB
Audio signal
Frequency
characteristics
Linear PCM DVD:
20 Hz to 20 kHz
(sampling rate: 48 kHz)
20 Hz to 20 kHz
(sampling rate: 96 kHz)
CD: 20 Hz to 20 kHz
S/N ratio CD: 94 dB (1 kHz)
Dynamic range Linear PCM DVD: 95 dB
CD: 94 dB
Total harmonic
distortion ratio
0.01% maximum
Power source
DV 3V [“AA” size (UM/SUM-3, R6, HP-7 or similar)
battery x 2]