Sharp AQUOS CRYSTAL 2 - Page 41

39
Basic Operations
AQUOS CRYSTAL 2
Changing Grip Magic Settings
In app sheet, (Settings)
Useful
Useful window opens.
Grip magic
Grip magic window opens.
Set each item
Setting is complete.
Grip Magic Operations
Enabling/Disabling Grip Magic
In Grip magic window, On / Off
・
Tap On to disable ( Off ), Off to enable ( On ).
・If confirmation appears, follow onscreen prompts.
Setting Whether to Turn On Display when
Handset Picked Up
In Grip magic window, Turn screen on by holding
・
Tap Turn screen on by holding to toggle on ( )/off
( ).
・If handset is picked up immediately after (about two
seconds) Pressing to turn Display off, Display may
not turn on when handset is picked up.
・If Proximity/Light Sensor is covered by a hand or
other object, Display may not turn on even when Grip
Sensor Areas are touched, or operation may not be
possible. Also, Display may turn off regardless of handset
settings.
Setting Whether to Minimize Volume and Use
Vibrator when Handset Picked Up for Incoming
Call
In Grip magic window, Volume down for incoming calls
・
Tap Volume down for incoming calls to toggle on
( )/off ( ).
Setting Whether to Prevent Vertical to
Horizontal Screen Change while Handset Held
In Grip magic window, Deterrence rotate screen
・
Tap Deterrence rotate screen to toggle on ( )/off
( ).
・The feature may not follow settings with certain
applications.
Setting Whether Handset Vibrates for New
Notification Indicator when Handset Picked Up
with Display Off
In Grip magic window, Notify by vibrating (
)
・
Tap to toggle on ( ), to toggle off
( ).
Setting Number of Times that Handset Vibrates
for New Notification
In Grip magic window, Notify by vibrating Notify
times Only once / Every time till notification
confirmation
・Available when Notify by vibrating is enabled.
Specifying Applications for which Handset
Vibrates
In Grip magic window, Notify by vibrating
Notification application setting Add apps Tap
application ( ) Add apps
・Available when Notify by vibrating is enabled.