Sharp AQUOS CRYSTAL 2 - Using Tethering Functions

107
Connectivity
AQUOS CRYSTAL 2
Using Wi-Fi Direct
Use Wi-Fi Direct to establish a Wi-Fi connection with other
Wi-Fi Direct compatible devices with no need for an access
point or Internet connection.
・Enable handset Wi-Fi first.
In app sheet, (Settings) Wi-Fi settings
Wi-Fi settings appear.
Advanced Wi-Fi Direct
Found Wi-Fi Direct compatible devices appear in Peer
devices field.
・
If target device does not appear, Tap SEARCH FOR
DEVICES to try searching again.
Tap target device Follow onscreen prompts for
authentication
Handset connects to the device.
・A connection request will be canceled if not accepted within
a certain period of time.
・
To disconnect devices, Tap one then Tap OK .
Using Tethering Functions
Tethering Functions
Tethering functions make handset act as an external modem
(like a Wi-Fi router).
Use tethering functions to connect a PC or game device to the
Internet through handset.
・Requires separate subscription.
・Use after confirming that handset is updated to the latest
software.
Setting Tethering Functions
When using tethering functions, several methods are available
for connecting handset with other devices.
Make settings according to connection method and status of
target device beforehand.
Settable items are the following.
Item Description
USB tethering
Set whether to enable tethering via Micro
USB Cable.
Wi-Fi
tethering
Set whether to enable tethering via Wi-Fi.
Set up Wi-Fi
hotspot
Set information such as network name and
security for Wi-Fi tethering.
Wi-Fi
tethering
Easy
Connection
Use WPS to connect handset to other
devices via Wi-Fi easily.
Bluetooth
tethering
Set whether to enable tethering via
Bluetooth
®
.
In app sheet, (Tools) (Tethering)
Tethering function window opens.
・If confirmation appears, follow onscreen prompts.
Set each item
Setting is complete.