Watching TV
Method
1
Using CH
A I'V on the remote control unit
or
on the
TV.
EXIT
~RETURN
O~O
- FAVORITE CH -
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter
0-9 only, channel selection will be made
if there is no operation within a few seconds.
To
select
a 1
or
2-digit
channel
number
(e. g., Channel 5):
Press
5~ENT
•
FLASHBACK
will not work if no channel has been
changed after the TV is turned on.
Method
3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
Method
2
1 Press
FLASHBACK to switch to the previously
tuned channel.
2 Press
FLASHBACK again to switch back to the
currently tuned channel.
MUTE
o
CH
•
•
INPUT
FLASHBACK
o
FREEZE
MENU
0c::::I:::::>0
888
VOL
SURROUND
j+)
oU
You can change channels
in
several ways.
AQuas
To
select
a
3-digit
channel
number
(e. g., Channel 115):
Press
1~1~5~ENT
To
select
a
4-digit
channel
number
(e. g., Channel 22.1):
Press
2~2~
• (DOT)
~1
~ENT
SH.4RP
• When you enter
0-9
only, channel selection will be made
if there is no operation within a few seconds.
• If you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter
0-9
and • (DOT), channel selection will
be made if there is no operation within a few seconds.
@-16
To Next Page
Loading...
