Watching TV
Press DISPLAY to display the current channel (or
input source) information
on
the screen.
When the TV receives a digital signal, press once, the
digital information will appear.
• Broadcast program name
• Station name • Remaining time
• Audio language • Program name
• V-CHIP RATING • HD or SD mark
• Closed Caption mark • V-Chip mark
25
A
MUTE
&10
VOL
SURROUND
o
-
VOL
+ v
CH
A.
INPUT
POWER
VOLUME
Changing the
volume
You can change the volume on the TV or on the
remote control unit.
Using
VOL
+/-
• To increase the volume, press VOL+.
• To decrease the volume, press
VOL-.
•
VOL+/-
on the TV operates the same as
VOL+/-
on the
remote control unit.
Using MUTE
on
the remote
control
unit
Mutes the current sound output.
Press DISPLAY again, the analog information will appear.
• Clock
• Channel number or VIDEO mode selected
• Channel label (if preset)
• Stereo or SAP (second audio program) audio status
• Content rating
• View mode
SURROUND
o
VOL
A
MUTE
&I.
STEREO
SAP
TV-PG
L V
SLEEP
TIMER
2hOOm
SIDE
BAR
TV
ABCD
CABLE
Press DISPLAY again to clear the display.
Press MUTE.
• "MUTE" will be displayed
on
the screen, and
the sound is silenced.
MUTE
CLOCK
12:00AM
SUN
7
• Mute can be canceled if you press
VOL+/-
or MUTE.
• Analog channel status will display on the screen for
approx. 4 seconds. Digital channel status will display for
approx. 10 seconds.
@-17
To Next Page
Loading...
