QUICK REFERENCE
STOP! To
safely
remove
the
AQUaS
television
from
the
box
It's best to use 2 people to remove the
AQUaS
television for stability.
1. Use the cardboard holders on either side of the AQUOS television to remove it from the box.
2. Remove the cardboard; however, keep the wrapping on the AQUOS television to protect it
while moving.
3.
Lift onto installation location as
the
diagram illustrates.
Ventilation &Cleaning Tips
ij"'\
Keep your
AQUaS
television
in
a well ventilated area and make sure not to place it by a heat
~~'
r-
..
~.,
....
:".,.,.,.".,.,.,:,.,.~,.,.,."tr,.,.,.r,.,.
""""""""""""""""""""""""".,.'.:'.:.
~J
source or use near water. The
AQUaS
television
is
designed for AC use only and should be
~
(j
used with supplied AC cord. '
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe
and avoid pressing
on
the screen. To clean the outer cabinet, use the same method. Do not
use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
.........
\ \ I /
QUICK INSTALLATION TIPS
1. Attach your antenna to the back
of
the TV.
(See page 13.)
2. Connect the AC plug for the AQUOS television into the
wall outlet.
U
• Place the TV close to the AC outlet, and keep the power
plug within reach.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF
ANY
CABLES
WITH THE
AC
CORD CONNECTED.
3.
Bundle the cords properly with a cable clamp and cable
tie.
4. How to turn on the AQUOS television for the first time.
A) Press POWER on AQUOS television.
CITJ CITJ
0
- VOL + V
CH
A INPUT
B) POWER indicator on the front
of
the AQUOS television
lights GREEN.
POWER indicator
• Speaker cannot be detached from the TV.
• TV angle cannot be adjusted.
@-7
To Next Page
Loading...
