QUICK REFERENCE
If the remote control fails to operate TV functions, replace the batteries
in
the remote control unit.
1 Open the battery cover.
2 Insert two "AAA" size batteries
(supplied with the product).
• Place the batteries with their terminals
corresponding to the (+) and
(-)
indications
in
the battery compartment.
3 Close the battery cover.
Improper use
of
batteries can result
in
chemical leakage
or
explosion. Be sure to follow the instructions below.
• Do not mix batteries
of
different types. Different types
of
batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life
of
new batteries
or
cause chemical
leakage
in
old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come
in
contact with skin can
cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period
of
time, remove batteries from it.
Remote control
sensor
IMPORTANT:
The POWER indicator
on
the
AQUaS
television should light GREEN indicating you have power to the AQUOS
television.
If the POWER indicator
on
the AQUOS television still does not light up, press TV
POWER
on
the remote control to turn the power on.
@)-a
IMPORTANT:
IF
THE UNIT DOES NOT POWER
ON
- UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND
. REPEAT THE INSTALLATION STEPS.
IF
YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
Please refer to the BASIC ADJUSTMENT SETTINGS SECTION and basic Initial setup functions and USING
EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc)
in
your AQUOS
operation manual.
To Next Page
Loading...
