Sharp AQUOS LC-46D85U

On-Screen Display Menu
Adjusts the picture to your preference with the
following _icture settings.
Example
_-_J Picture ]
• When set to "On", the Optical Picture Control (OPC) senses
the surrounding light and automatically adjusts the backlight
brightness. Make sure nothing obstructs the OPC sensor,
which could affect its ability to sense surrounding light.
• When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
• When set to "On" or "On: Display", the OPC indicator on
the TV lights green.
This TV provides various advanced functions for
optimizing the picture quality.
FREEZE M_NU
i 0 @
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
C,M,S,-Saturation: Increases or decreases the
saturation of a selected color.
• For resetting all adjustment items to the factory preset values,
press A/T to select "Reset", and then press ENTER.
1 Press MENU to display the MENU screen, and then
press </1_ to select "Picture".
2 Press A/V to select a specific adjustment item.
• Select "Advanced" and then press ENTER to set
"C.M.S. -Hue", "C.M.S.-Saturation","ColorTemp.",
"Active Contrast", "FineMotion Enhanced","I/P
Setting", "FilmMode", "DigitalNoiseReduction", "3D-Y/
C", "Monochrome" or "Range of OPC".
3 Press &/V(or </1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Backlight Thescreendims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less For more
brightness brightness
Color For less color For more color
intensity intensity
Tint Skin tones Skin tones
become reddish become greenish
Sharpness For less For more
sharpness sharpness
For resetting all Picture adjustment items to the factory
preset values, press A/V to select "Reset", press ENTER,
press </1_ to select "Yes", and then press ENTER.
Automatically adjusts the brightness of the screen.
Off: The brightness is fixed at the value set in "Backlight".
On" Automatically adjusts.
On: Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
For a better white balance, use color temperature
correction.
High: White with bluish tone
Mid-High: t
Middle:
Mid-Low:
Low: White with reddish tone
White balance can be adjusted between a maximum of
+30 and a minimum of -30 for each color temperature.
R Gain" -30 through +30
G Gain" -30 through +30
B Gain" -30 through +30
• For resetting all adjustment items to the factory preset values,
press A/V to select "Reset", and then press ENTER.
Automatically adjusts the image contrast according to
the scene.
On" Automaticallyadjuststhe imagecontrast.
Off: No adjustment.
Use Fine Motion Enhanced to view fast-action video
more clearly.
On" Forobtaining a clearer image.
Off: Normal image.
• Fine Motion Enhanced may cause image noise. Ifthis
occurs, turn the function "Off".
Q-21