On-Screen Display Menu
Converts input signals depending on the type of images.
Fast: Suitable for fast-moving images
Slow: Suitable for smooth images with low amounts of
flickers
• "l/P Setting" is not selectable when channel display shows
an input resolution of 480p, 720p, or 1080p.
You can adjust the sound quality to your preference
with the following settings.
Example
[9 Audio
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
On: Detects, analyzes,convertsfilm source.
Off: Normalviewing mode.
• "Film Mode" does not function when you set the "AV Mode"
to "Game".
• "Film Mode" is not selectable when channel display shows
an input resolution of 480p, 720p, or 1080p.
Produces a clearer video image.
Off: No adjustment
High/Middle/Low: Select a desired level for viewing a
clearer video image.
• "Digital Noise Reduction" is not selectable when channel
display shows an input resolution of 1080p.
• Deep Color is not supported when Digital Noise Reduction
is selected.
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Off (2D}: For Game Mode.
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of -16.
Max.: -15 through +16
Min,: -16 through +15
• The range of OPC settings are active only when the OPC is
set to "On".
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
(D- 22
i F SE
sl
'8"° /
1 Press MENU to display the MENU screen, and then
press _1/1_ to select "Audio".
2 Press A/T to select a specific adjustment item.
• Select "Surround" or "Bass Enhancer"and then press
ENTER to set each item.
3 Press A/T (or _1/1_) to select the desired setting,
and then press ENTER.
Press MENU to exit.4
Treble
Bass
Balance
For weaker treble For stronger treble
For weaker bass For stronger bass
Decreaseaudio from Decreaseaudio from
the right speaker the left speaker
• Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
• For resetting all Audio adjustment items to the factory
preset values, press A/V to select "Reset", press ENTER,
press _/1_ to select "Yes", and then press ENTER.
Surround function allows you to enjoy realistic "live" sound.
On: Surround function is on.
Off: Normal sound.
• You can choose Surround by pressing SURROUND on the
remote control unit. (See page 15.)
• Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
• For some discs, setup may be required on your DVD player, In this
case, please referto the operation manual of your DVD player.
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
• Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
To Next Page
Loading...
