Watching TV
:
3
Press A/V to select the time zone where you are
using the TV, and then press ENTER.
Example
Antenna & Cable/STB
Select the type of connection you will use to
watch T_.
6 Press 4/_ to select "Antenna& Cable"or "Set-
top box", and then press ENTER.
4
o The time zone differs depending on the selected
country.
o The factory preset value is the time zone for the capital
of the selected country.
Press A/V to select the Daylight Savings Time,
and then press ENTER.
o "Auto" is the default selection.
TV Location
Select "Home" or "Store" for the location where
you plan to install the TV. This product qualifies for
ENERGY STAR in Home mode default setting.
5 Press 4/_ to select "Home" or "Store".
Press ENTER to enter the setting.
Home: "Power Saving" is set to "Advanced", and AV
MODE is set to "STANDARD".
Store: "Power Saving" is set to "Off" and AV MODE is
set to "DYNAMIC (Fixed)". Picture Reset and Feature
Demo can be set.
Picture Reset: AV MODE wi]] be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When "On" is selected, after all the settings
are corrlp]eted, the Feature Demo screen is displayed if there
is no operation for sew_ral minutes.
To watch TV via an antenna or cable
connection (without using a set-top box):
Select "Antenna & Cable", and then go to step 7.
To watch TV via a set-top box:
(i._ Select "Set-top box", and then press ENTER.
(9 To watch TV, select the input source
corresponding to the terminal connected to the
set-top box. When doing so, you must make
the setting to skip "TV". Press 41/_ to select
"On", and then press ENTER.
,, Whenthis isset to "On", the channelon the TV
cannot be changed usingthe remote control unitor
menu. (e.g.OH/'k/V, FavoriteOH,etc.)
,) See page30 for detailson the InputSkip function.
(_ Press INPUT to select the input source
corresponding to the terminal connected to the
set-top box. Make the necessary settings on
the connected external equipment.
,, Seethe operation manualofthe connected
equipment for setting upthe equipment.
Air/Cable (Antenna setting}
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable".
7 Press 4/_ to select "Air" or "Cable".
Press ENTER to enter the setting.
ENERGY STAR qualification is based on AV MODE
"STANDARD".
(D-18
To Next Page
Loading...
