Watching TV
OH Search (Channel search)
Channel auto search makes the TV look for all
channels viewable in the set area.
8 When "Air" is selected in Antenna setting:
Press 4/_ to select "Start", and then press
ENTER.
Completed
9 The settings confirmation screen is displayed.
Confirm the information displayed on the screen,
and then press ENTER.
Examples of the settings confirmation screen
When one or more channel is received after
"Antenna & Cable" was selected in step 6 and a
search was carried out.
When "Cable" is selected in Antenna setting:
(1._Press A/V to select "Analog & Digital Search
Start" to search both analog and digital
broadcasts, or to select "Analog Search Start"
to search only analog broadcasts, and then
press ENTER.
When no channel is received after "Antenna &
Cable" was selected in step 6 and a search was
carried out.
o The Channelsearch willstart automatically.
o To exitthe Channelsearch screen,select "Cancel",
andthen press ENTER.
(9 The Channel search results may include
scrambled channels or channels that are not
viewable in the set area. Press 4/1_ to select
"Yes", and then press ENTER to remove
scrambled channels.
When "Set-top box" was selected in step 6 and a
search was carried out.
= If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again.
(See page 33.)
= For changing the settings of the Initial Installation, perform
"EZ setup" on the Initial Setup menu on page 33.
= To see the list of channels found during Channel search,
press iNPUT, and then press _.
Q-19
To Next Page
Loading...
