Direct Button Operation
8
8
•
FREEZE
MENU
• •
•
ec::::I:::::>0
8@8
• • •
EXIT
<::::::::!:::::
RETURN
• •
•
0
9
0
• • •
- FAVORITE
CH
-
0®@
@
~
INPUT
FLASHBACK
••
RECSTOP
OPTION
FAVORITE
00
0
SLEEP AUDIO
AVMOOE
CC
VOL
CH
••••
SURROUND
IMeE
•
Changing Channels
You can change channels by pressing
CH/\lV
or 0-9.
•
(DOT).
Examples:
To
select a 1 or 2-digit channel number
(e.
g.,
Channel
5):
Press
5
-----7
ENT.
To select a 3-digit channel number
(e.
g., Channel
115):
Press
1
-----7
1
-----7
5
-----7
ENT.
To
select a 4-digit channel number
(e.
g., Channel
22.1):
Press
2
-----7
2
-----7
•
(DOn
-----7
1
-----7ENT.
Em
•
When
selecting a 1-digit channel number.
it
is
not
necessary to press 0 before
the
number.
•
When
you
enter 0-9
only,
channel selection
will
be
made if
there
is
no operation within a few seconds.
•
If
you
push
"0"
by
itself,
nothing
will
happen.
• Complete the above steps within a few seconds.
•
When
you
enter 0-9
and
•
(DOT),
channel selection
will
be
made if there
is
no operation within a few seconds.
Changing Volume
You can change the volume by pressing
VOL+/-
on
the N
or
on the remote control unit.
• To increase the volume, press
VOL+.
•
To
decrease the volume, press
VOL-.
Audio
status
Speaker Variable sound Mute
•
When
"Output Select"
is
set
to "Variable", the indicator
on
the screen changes
as
shown below.
Em
•
See
page 29 for details
on
the Output Select function.
MUTE
Mutes the current sound output.
Press MUTE.
•
"[~"
will
be
displayed
on
the
screen for 30 minutes.
and
the sound
is
silenced.
Em
• Within 30 minutes of pressing MUTE, mute
can
be
canceled
by
using one of the methods below.
- Mute
will
be
canceled
if
you
press VOL +
1-
or MUTE.
• Mute
will
be
canceled after 30 minutes
have
passed.
However, the
TV
will
not suddenly output a loud sound
as
the volume
level
is
set
to 0 automatically.
@-16
Sleep Timer
Allows you to set a time when the N automatically
switches to standby.
Press SLEEP.
•
The
remaining
time
displays
when
the
sleep
timer
has
been
set.
•
Each
time
you
press SLEEP, the remaining time switches
as
shown below.
Off
...
30'"
60
...
90
...
120
t ,
•
When
set,
the time automatically starts counting down.
•
If
you
want to adjust
the
sleep timer,
you
can
press SLEEP
twice then change the time setting.
•
Five
minutes before the time expires, the remaining time
displays
every
minute.
Em
• Select
"Off"
by
pressing SLEEP to cancel the sleep timer.
•
The
TV
will
enter
standby
when
the
remaining
time
reaches
zero.
•
When
the
sleep
timer
is
set,
its
indicator
on
the
TV
lights
red.
FLASHBACK
Press
FLASHBACK
to switch to the previously tuned
channel.
•
Press
FLASHBACK
again
to switch back to the currently
tuned channel.
Em
• FLASHBACK
will
not work
if
no channel
has
been
changed
after the
TV
is
turned
on.
SURROUND
The surround function produces Surround effect from
the speakers. Each time you press SURROUND, the
mode changes between On and Off.
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
Em
•
You
can
have
the same settings
by
choosing "Surround"
on
the menu items.
(See
page
23.)
FREEZE
Allows you to capture and freeze a moving image that
you are watching.
Press FREEZE.
• A moving image
is
captured.
•
Press
FREEZE
again
to cancel the function.
Em
•
When
this function
is
not
available,
"No displaying
still
image available."
will
display.
•
The
still
image automatically goes out after 30 minutes.
•
If
you
are
using the freeze function
and
a broadcast
activates the V-CHIP BLOCK, the
freeze
function
will
be
canceled
and
a V-CHIP BLOCK message
will
appear.
INPUT
To view external source images, select the input source
using INPUT
on
the remote control unit or
on
the
N.
1 Press INPUT.
• A list of selectable sources appears.
2 Press INPUT again or press
JJ..I~
to select the
input source.
•
An
image
from
the
selected source automatically
displays.
•
Each
time INPUT
is
pressed, the input source toggles.
•
If
the
corresponding
input
is
not
plugged
in,
you
cannot
change
the
input.
Be
sure
to
connect
the
equipment
beforehand.
Em
•
See
pages
13
and
14
for external equipment connection.
To Next Page
Loading...
