Appendix
Setting the TV on the Wall
mmm
• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP) (for LC-46SE94U1
LC-52SE94U) or AN-65AG1 (SHARP) (for LC-65SE94U). The use of other wall mount brackets may result in an
unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed
by
qualified service personnel. Customers
should not attempt to do the
work
themselves, SHARP bears no responsibility for improper mounting or mounting
that results
in
accident or injury.
Using an optional
bracket
to
mount
the
TV
• You can ask a qualified service professional about using
an
optional AN-52AG4 or AN-65AG1 bracket to mount the
TV
on the wall.
• Carefully read the instructions that
come
with the bracket before beginning work.
AN-65AG1
About setting the TV angle
• The "A" position
is
at the
center of the display.
Refer to the operation
manual of AN-65AG1 for
details.
AN-52AG4
LC-46SE94U
• The center
of
the display:
6
3
/
4
inch (174.25 mm)
under the "A" position.
LC-52SE94U
• The center of the display:
5
1/
4
inch (136.1 mm) under
the "A" position.
• Refer
to
the operation
manual of AN-52AG4 for
details.
LC-46SE94U
LC-52SE94U
0"/5"/10'/15'/20"
Angular mounting
Vertical mounting
Hanging on
the
wall
AN-52AG4 or AN-65AG1 wall mount bracket.
(See the bracket instructions for details.)
LC-65SE94U
ED
• Detach the cable clamp on the rear of the TV when using the optional mount bracket.
• To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the
TV,
and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the
TV.
@-
46
To Next Page
Loading...
