Sharp AQUOS LC-65SE94U

QUICK REFERENCE
• LC-46SE94U1LC-52SE94U
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1 Confirm that there are 4 screws and a screwdriver 3 Connect the ends of the cables to the speaker
supplied with the speaker unit. terminals as shown below.
, , "~ b ~~~~e~~I~~~ leads to the speaker terminals of the
2 Insert the projections on the speaker unit into the
corresponding slots
on the TV, then fasten the screws.
1- Sc'owd",e,
T-Screws
0---'6''4''
2 -~ \:!I
"' .. :/'
BlaCki iRed
··I~I·
~~;~Red
Black~ ~
~~e
mm
• To detach the speaker unit, perform the steps in reverse
order.
Attaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base
area to lay the TV on. This will prevent it from being damaged.
Emm
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result
in the TV falling over.
1 Confirm that there are 12 screws (all the same size) 3 CD Insert the stand into the openings on the
supplied with the
TV. bottom of the TV.
~~~~SSS~~~,GU~H;'~ ® Insert and tighten the 4 screws into the 4 holes
"[
IT IT "["["[ IT "["["["["[ on the rear of the TV.
2
@-6
---Hex key
mm
• To detach the stand, perform the steps in reverse order.