Connecting to External Equipment
You can connect many types of external equipment to your TV. To view external source images, select the input
source from INPUT on the remote control unit or on the TV. (See pages 13 and 22.)
For connecting the TV to external equipment, use commercially available cables.
* To protect equipment, always turn off the TV before connecting any external equipment.
* Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
When using HDMI cable (HDMI 1, 2, 3 or 4):
The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and
video signals using a single cable. The HDMI tern_inal supports high-resolution video input.
HDMI-certified cable
* To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable
and set the equipment to 1080p output.
* Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
* When you connect external equipment using a DVI-HDMI conversion cable or when you connect ARC-compatible
equipment, use HDMI 1.
m When using DVI=HDMI conversion cable (HDMI 1}:
DVI-HDMI conversion cable
® 3.5 mm stereo minijack cable
* When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI 1 tern_inal, connect a © 3.5 mm stereo minijack cable to the AUDIO
IN terminal and set "Audio Select" to "HDMl+Analog". (See page 62.)
Q-14
To Next Page
Loading...
