Watching TV
mPOWER
o
z
v
I
POWER (On/Standby)
POWER
POWER
DISPLAY(SOURCE/
TV STB DVD'VCR AUDIO
CZ3 C2:3 E:D CZ3
_ _ ®REC
POWER
OPTION SLEEP SAVING FREEZE
CZ] CZC] CZ3 CZZ]
Press POWER on the TV or on the remote control unit
to turn the power on.
When you turn on the TV for the first time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
1. Insertthebatteriesintotheremotecontrolunit.(Seepage10.)
2. Connect the antennacableto the TV. (Seepage 10.)
3. Plugin the AC cordto the AC outlet.(Seepage9.)
APPS
Language (Language setting)
Select from among 3 languages: English, French and
Spanish.
1 Press A/T to select the desired language listed
on the screen, and then press ENTER.
o The Initial Installation starts when the TV powers on for the
first time. If the TV has been turned on before, the Initial
Installation will not be invoked. For changing the settings of
the Initial Installation, perform "EZ setup" on the Initial Setup
menu on page 34.
Press POWER on the TV or on the remote control unit
again to turn the power off.
o TheTV entersstandby and the imageon the screen
disappears.
TV Location
Select "Home" or "Store" for the location where
you plan to install the TV. This product qualifies for
ENERGY STAR in Home mode default setting.
2 Press 4/_ to select "Home" or "Store".
Press ENTER to enter the setting.
o Ifyou are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
o Weak electric power is still consumed even when the TV is
turned off.
Home: "Power Saving" is set to "Advanced", and AV
MODE is set to "STANDARD".
Store: "Power Saving" is set to "Off" and AV MODE is
set to "DYNAMIC (Fixed)". Picture Reset and Feature
Demo can be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardbss of whether Picture Reset is "On" or "Off",
®if you sebct "On" and there is no operation for 30 minutes:
- AV MODE will be reset to "DYNAMIC (Fixed)" and, when a
3D signal is detected, 3D images will switch to 2D images,
®When "Off" is sebcted:
AV MODE will be set to "DYNAMIC (Fixed)",
Feature Demo: When "On" is sebcted, after all the settings
are corrlpleted, the Feature Deme screen is displayed if there
is no operation for several minutes,
(D-18
ENERGY STAR qualification is based on AV MODE
"STANDARD".
To Next Page
Loading...
