Supplied Accessories
Make sure the following accessories are provided with the product.
Remote control unit "AAA" size battery Stand unit Operation manual Connection guide
(xl) Page 9 (x2) Page 10 (xl) Page 8 (xl) (xl)
,.,.......... J
Always use the AC cord supplied with the TV.
The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE
0 b,,......
o Before attaching (or detaching) the stand, unplug the AC cord.
o Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
o Attach the stand in the correct direction.
o Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
o Be sure to follow the instructions. Incorrect installation of the stand may result in the TV failing over.
1 Confirm that there are 12 screws (8 long screws
and 4 short screws) supplied with the stand unit.
2 @ Set the post for the stand unit onto the box.
_} Attach the base to the post.
(@ Insert and tighten the 8 screws into the 8 holes
on the bottom of the base.
o Hold the stand unit securely with one hand, and then
tighten the screws.
screws
3
Insert the stand into the openings on the rear of the TV.
o Make sure that the stand is firmly inserted into the TV.
Improper installation may result in tilting of the TV set.
Soft cushion
4
Insert and tighten the 4 screws into the 4 holes on
the rear of the TV.
h h
_ _- Short......
To detach the stand, perform the steps in reverse order.
o In the installation procedure, be careful not to catch your
fingers between the TV set and the floor.
Q-8
To Next Page
Loading...
