introduction to Connections
For connecting the "IV to external equipment, use commercially available cables=
. The illustrationsofthe terminals are for explanationpurposesand mayvary slightlyfrom the actual products.
II Connecting to video equipment or PC
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your
external equipment and use its appropriate terminals for higher quality images.
HD _ HDMI-certified cable _,PagesQuality _ 14,16,17
0 3.5 mm stereo minijack cable
®,
..............
Standard Zf-_ - ,_,
Quality '_' '/_\_,,v_),_.;_
DVI-HDMI conversion cable
®
AUDIO ll_ Pages
14, 17
DVI OUT
Component video cable j_ _ _ _
COMPONENT
Audio cable _ R_ _L
AUDIO
m Connecting to audio equipment
Page 15
AVcable _ _ _L _ • Page 15AUDIO VIDEO
B
Optical fiber cable
_33.5mmstereominijackto RCAaudiocable 1.-4d3=
OPTICAL
DIGITAL AUDIO INPUT
R® ®L
ANALOG AUDIO IN
Page 16
Page 16
To view external source images, select the input source by pressing iNPUT on the remote control unit or on the TV.
Example 1 Press INPUT.
• The INPUT list screen displays.
2 Press A/T to select the input source.
INPUT
_ APPS
°A
EXIT RETUR
You can also select the input source by pressing
INPUT. Each time INPUT is pressed, the input source
toggles.
HDMI1 -_, HDMI2-_ HDMI3
t t
TV _- HDMI4
An image from the selected source automatically
displays.
If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
Q-13
To Next Page
Loading...
