Appendix
This TV should be mounted on the walJ only with the wall mount bracket AN-52AG4 (SHARP}. The use of other
waJJ mount brackets may result in an unstabJe instaJJation and may cause serious injuries.
= Installing the TV requires special skill that should only be performed by qualified service personnel. Customers
should not attempt to do the work themseJves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using an optional bracket to mount the iV
,, You can ask a qualified service professional about using an optional AN-52AG4 bracket to mount the W on the wall.
,, Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-52AG4 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting
Angular mounting
About setting the TV angle
AN-52AG4 o The center of the display:
sAGinch (8.0 mm) under the "c"
°/5° position.
o Refer to the operation manual of
AN-52AG4 for details.
Due to the terminal configuration on this TV, when you wall-mount this
model, make sure there is enough space between the wall and the TV
for the cables.
To use this TV mounted on a wall, remove the AC cord holder and the
covers at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of
the TV.
The listed optional accessories are available for the Liquid
Crystal Television. Please purchase them at your nearest
shop.
Additional optional accessories maybe availableinthe near
future.When purchasing, pleaseread the newestcatalogue for
compatibility and check the availability.
Wall mount AN-52AG4
bracket
3D Glasses AN-3DG10-S/R/A
AN-3DG20
@- 77
To Next Page
Loading...
