On=Screen Display Menu
You can adjust the sound quality to your preference
with the following settings.
Example
APPS
A B C D
CDOOO
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "Audio Settings".
2 Press A/V to select a specific adjustment item.
o Select "Auto Volume", "3D Surround", "Bass Enhancer"
or "Clear Voice", and then press ENTER to set each
item.
3 Press A/T (or 41!/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio Decrease audio
from the right from the left
speaker speaker
Different sound sources sometimes do not have the
same loudness level, such as a program and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
High: Reducing the loudnessgaps among different
sound sourcesstrongly.
Middle:
Low: Reducingthe loudnessgaps among different
sound sourcesslightly.
= Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 32.)
The surround function produces Surround effect from
the speakers.
3D Hall: Reproducing concert hall experience with
realistic live surround sound using measured
reverberant sound in the concert hall.
3D Movie: Reproducing movie theater experience
with realistic live surround sound using measured
reverberant sound in the movie theater.
3D Standard: Creating 3 dimensional surround sound
with detailed control of the signal phase.
Normal: Providing mild surround sound.
Off: Outputs the normal sound.
= Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 32.)
= For some discs, setup may be required on your DVD/BD
player. Inthis case, please refer to the operation manual of
your DVD/BD player.
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
= Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 32.)
= For resetting Audio adjustment items to the factory preset
values, press A/_V to select "Reset", press ENTER, press
h,/T to select "Yes", and then press ENTER.
= Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 32.)
This function emphasizes speech against background
noise for greater clarity.
= Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 32.)
Q- 29
To Next Page
Loading...
