AR-203E/5420/M200/M201 FIRMWARE DOWNLOAD PROCEDURES 14 - 7
<Installation on Windows XP>
1) Main unit side: Execute simulation No. 49-01 (Flash ROM pro-
gram write mode).
Check that "d" is displayed (or "DOWNLOAD MODE" is dis-
played for the AR-M200/M201) on the operation panel. (Press
and hold [Clear] key and [ZOOM DOWN] key ( ) (or
[ZOOM]/[COPY RATIO] key for the AR-M200/M201) together,
and turn on the power simultaneously.)
2) Connect the machine and the PC with a USB cable.
3) The following display is shown.
Select [Install from a list or specific location] and press <Next>
button.
4) Select [Include this location in the search;]. If the search loca-
tion is not the folder which includes the maintenance tool
driver (Mainte.inf), select <Browse>. If the search location is
the folder which includes the maintenance tool driver, press
<Next> button to go to procedure 7).
5) Select the folder which includes the maintenance tool driver
(Mainte.inf) and press <OK> button.
(Suppose that the driver is included in
C:\MaintenanceTool\Drivers\2kXp folder.)
6) Check the path to the folder which includes the maintenance
tool driver (Mainte.inf), and press <Next> button.
7) When the following display is shown, press [Continue Anyway]
button.
To Next Page
Loading...
