TROUBLESHOOTING
16
CONTENTS INDEX TOP OF CHAPTER
16
PRINTER DOES NOT PRINT (2)
The printer is on but data is not received (DATA
indicator does not blink).
☞
NORMAL PRINTING
Check: Printer set to the ONLINE mode?
Solution: Select the PRINT mode and use the
key to select the ONLINE mode.
Check: Correct printer cable properly connected
between the printer and your computer?
Solution: Check both ends of the printer cable and
make sure you have a solid connection.
Try a known good cable. For information
on cables, see "SPECIFICATIONS" in
the Operation Manual for the machine.
Check: Correct printer driver installed?
Solution: Install the appropriate printer driver. For
the procedure for installing the printer
driver, see the separate "AR-5127 Series
SOFTWARE SETUP" manual.
Check: Is the port configured correctly?
Solution: It is possible that there is a problem with
the port configuration, for example
another printer driver may be using the
port. Open the printer driver properties
and correctly configure the port that you
are using.
Check: Is the correct printer selected?
Solution: From the application, select the correct
printer.
To Next Page
Loading...
