TROUBLESHOOTING
20
CONTENTS INDEX TOP OF CHAPTER
20
IMPROPER PRINTING OPERATION (3)
Paper specified from application is not used.
Stapling cannot be performed.
Printer write error occurs.
Check: Is the paper selection setting in the
printer driver appropriate?
Solution: Place the desired size of paper in the
printer paper tray, and set the paper
selection setting in the printer driver to
'Auto Select'.
Check: Different sized papers used?
Solution: Stapling cannot be performed on different
sized papers.
Check: Paper size acceptable for stapling?
Solution: Check the acceptable paper sizes for
stapling referring to the operation
manual.
Check: Timeout time too short?
Solution: Open the printer driver properties and
select a longer timeout setting.
NOTE:
Even if a longer time is set, a printer write error may
occur when copying is being performed.
To Next Page
Loading...
