Sharp AR-M236

AR-M236/M276/M237/M277 SPECIFICATIONS 3 - 4
4. Additional functions, copy functions,
and expanded functions
5. Safety and environmental protection
standards
(1) Safety and environmental protection standards
(2) Ozone level
(3) Noise level
APS Yes (No for APS by flow scan with the
RSPF)
AMS Yes (No for AMS by flow scan with the
RSPF)
Stream feeding mode Yes
Job build function Yes (Copy/Scan)
Auto tray switching Yes (No for manual paper feed)
Memory copy (600
dpi)
Yes (1 page memory provided as standard)
Memory copy (1200
dpi)
Yes (1 page memory provided as standard)
Rotation copy Yes
E-sort Yes
XY zoom Yes
When the OC is used: Landscape/Portrait
25 – 400% (50 – 200% for 1200 dpi)
When the RSPF is used: Landscape/Portrait
50 – 200% (50 – 141% for 1200 dpi)
1 set 2 copy Yes (No for enlargement)
Binding margin Yes
Default AB series: 0 – 20 mm (Unit of 1 mm)
Inch series: 0 – 1 inch (Unit of 1/8 inch)
Edge erase Yes
Default AB series: 0 – 20 mm (Unit of 1 mm)
Inch series: 0 – 1 inch (Unit of 1/8 inch)
Center frame erase Yes
Default AB series: 0 – 20 mm (Unit of 1 mm)
Inch series: 0 – 1 inch (Unit of 1/8 inch)
Booklet copy Yes (Printing only)
White/black reversion Yes
Whole surface only (Can be inhibited with
the simulation.)
2 in 1/4 in 1 Yes
Sorter Yes
Offset function (shifter or finisher) required
Mix paper feed Yes (Only when this function is set)
Preheating Yes (Conditions are set with the key
operator program.)
Auto power shut off
function
Yes (Conditions are set with the key
operator program.)
Message display Yes
Key operator
program
Yes
Printer status
monitor/Printer
administration utility
Yes (A PCL printer board is required (TCP/
IP only). To use another protocol, an NIC
card is required.)
Wireless LAN support Yes (A 3rd party part is recommended.)
Coin vendor support Yes (Option only for the models for dealers)
Auditor support Yes
Duplex Yes (Standard)
Total counter Yes
Toner save Yes
Department
management
Yes (100 departments)
Job registration/call Yes (10 jobs)
Cover paper Yes (Insertion and stapling must be allowed
from manual feed.)
OHP insert paper Yes (Only printer function)
Self print function Yes (The service simulations in the machine
and the key operation list are printed.)
Built-in clock Yes
Paper exit tray
selection
(When the finisher is installed)
Machine: Copy/FAX/*Printer
Top tray: Copy/*FAX
Offset tray: Printer/*Copy
(When the job separator is installed)
Machine: *Copy/Printer/FAX
Job separator tray: Copy/*Printer/*FAX
* Default: (The above setup items for each
paper exit tray can be changed by the user.)
1 page memory 48MB
Item
Environment
acknowledgment
USA: EnergyStar
Canada: ECP, EnergyStar
Germany: Blue angel conformity
Europe: EnergyStar
North Europe: Nordic swan
Safety
acknowledgement
& EMI
USA: UL/FDA/FCC
Canada: cUL/FDA/FCC
Europe: CE/SEMKO/ITSGS
UK: CE/SEMKO/ITSGS
Australia: IEC60950 conformity/C-TICK
Taiwan: Taiwan EMI (Class B)/CNS conformity
Russia: GOST-R
Middle East, Africa: CE conformity/IEC60950
conformity/CISPR22 conformity
China: CCC
Others: ICube/NOM (Mexico)/FCC conformity/
CISPR22 conformity/IS112/IS961-6.1/2
Ozone Less than 0.02mg/m³
Dust Less than 0.075mg/m³
Operating Less than 63dB
On standby Less than 40dB