35
CANCELLING AN E-MAIL/FTP TRANSMISSION
You can cancel a transmission job that is in progress or that has been stored. Cancellation is done from the scanner
job status screen for the mode in which you stored tramsmission.
1
Press the [JOB STATUS] key.
2
Touch the mode key ([E-MAIL/FTP] or
[INTERNET-FAX]).
3
Touch the job key of the transmission job
you wish to cancel.
The touched key is highlighted.
4
Touch the [STOP/DELETE] key.
A message appears to
confirm the cancellation.
Touch the [YES] key to
delete the selected job
key and cancel the
transmission.
To Next Page
Loading...
