INITIAL SETUP PROCEDURE
10
February 2005
OTHER
Sim 26-10 Trial Mode activation – Network Scanner
Sim 22-06 Print All Simulation Data
FAX – AR-FX8
Sim 66-02 Fax Destination
Sim 66-10 Image Memory Clear
(only perform when AR-MM9 is installed)
CUSTOM SETTINGS
Entry Mode :
Press Custom Settings key
Press KEY OPERATOR PRG.
Enter Key Operator code (DEFAULT – 00000)
Change Key Operator Password:
Enter Key Operator mode, using procedure listed above
Press Key operator code change
Enter new 5-digit code
Press OK key.
To Next Page
Loading...
