Sharp AR-M550U - Paper Exit

JAM CAUSE CODES
40
February 2005
Jam Code Description
JAM Detection
Timer Start Trigger (JAMTST)
JAM Judge Detector
(JAMJD)
BPT
Manual feed tray jam
(MPFD1 not reached)
MPFC on MPFD1 on
LPPD_N
LPPD not reached jam LTD on (LCC) LPPD on
PFD2_ ST1
PFD2 remaining jam
(Tray 1 paper feed)
RRC on
PFD2 off (PFD2 paper rear
edge detection) + 65mm
PFD2_SM1
PFD2 remaining jam
(Tray3 paper feed)
M1PFD off (When paper is
transported by 50mm from
M1PFD paper rear edge
detection)
PFD2 off
PFD2_SM2
PFD2 remaining jam
(Tray4 paper feed)
M1PFD off (When paper is
transported by 50mm from
M1PFD paper rear edge
detection)
PFD2 off
PFD2_SAD
PFD2 remaining jam
(ADU re paper feed)
RRC on
PFD2 off (PFD2 paper rear
edge detection) + 65mm
PPD_ST1
PPD1 remaining jam
(Tray 1 paper feed)
PFD2 off PPD off
PPD_ST2
PPD1 remaining jam
(Tray2 paper feed)
MPRD2 off PPD off
PPD_SM1
PPD1 remaining jam
(Tray 3 paper feed)
PFD2 off PPD off
PPD_SM2
PPD1 remaining jam
(Tray 4 paper feed)
PFD2 off PPD off
PPD_SLC
PPD1 remaining jam
(LCC paper feed)
MORD2 off PPD off
PPD_SAD
PPD1 remaining jam
(ADU paper re feed)
PFD2 off PPD off
PPD_SMF
PPD1 remaining jam
(Manual feed tray
paper feed)
MPRD2 off PPD off
POD1_S
(Right paper
exit form)
POD1 remaining jam PPD off POD1 off
POD1_S (Left
paper exit)
POD1 remaining jam PPD1 off POD1 off
POD2_SR
POD2 remaining jam
(When paper is
discharged on the right
side of the machine)
POD1 off POD2 off
POD2_SL
POD2 remaining jam
(When paper is
discharged on the left
side of the machine)
POM1 on (Switchback start) POD2 off
AINPD_S
(Saddle
paper exit)
ADU paper entry
sensor remaining jam
POD2 off AINPD off
AINPD_S
(Other)
ADU paper entry
sensor remaining jam
POD2 off AINPD off