INITIAL SETUP PROCEDURE
9
February 2005
INITIAL SETTINGS
Sim 21-01 Maintenance Cycle Setting
ARM550U set 250k
ARM620U set 300k
ARM700U set 300k
Sim 26-02 LCC Paper Size Set-up
Sim 26-05 A3 paper count ( set 1or 2 counts)
Sim 26-06 Destination setup.
Sim 26-35 Set Multi Error Counter
Set to 1 (Multi Count
IMAGE WRITING DISTORTION (SKEW)
Sim 64-01 Print Area adjust
Pattern 71
Density 100
Level 3
IMAGE POSITION & OFF CENTRE
Sim 50-05 Print Area adjust (Sub scan)
Image Off-Centre adjustment.
Adjust (All Cassettes)
Sim 50-12 OC & RADF Off Centre Adjust
COPY IMAGE POSITION
Sim 50-01 OR
Sim 50-02 Lead/Rear Edge, Image Loss & Void Adjustment
COPY DENSITY
Sim 46-02 Copy Density Adjustment.
Cont’d
To Next Page
Loading...
