INITIAL SETUP PROCEDURE
8
February 2005
REMOVAL OF MACHINE FROM CARTON
It is recommended to use a fork lift truck however, if a fork
lift truck is not available, it will require 4 people to lift
the machine from the carton
LOCK & PACKING REMOVAL
Number 2/3 mirror base lock screw.
Tray rotation release plate lock.
Fuser pressure release screws (turn fully anticlockwise
DEVELOPER SETUP
Sim 25-01 Developer Stir
Sim 25-02 Developer level setting
PROCESS CONTROL
Sim 44-02 ID & DM Sensor adjustment
TONER INSTALLATION
Before installing the toner cartridge ensure the cartridge
is shaken horizontally several times.
Be careful not to rotate the toner cartridge.
CASSETTE SETUP & PAPER TYPE
Set cassette sizes by adjusting the guides in the cassette.
Paper Type Setting
Custom Settings – Tray Settings
Cont’d
To Next Page
Loading...
